REDLINK DEVELOPMENT KIT
REDLINK® Development Kit on sopiva työkalu kameran langattomaan hallintaan. Kitti sisältää USB-tikun, jossa on esiasennettuna REDLINK SDK sample appseja.
The REDLINK® Development Kit allows programmers to create custom applications to control their DSMC via mobile device, computer, or microcontroller. The kit contains a USB pre-loaded with the REDLINK SDK sample apps, as well as additional resources.
Use the SDK, apps, and resources to create custom applications that allow you to adjust controls on the DSMC, including Record Start/Stop, Shutter Speed, White Balance, ISO, and programmable User Keys. You can also program your custom app to monitor the status of your camera settings.
Completing the REDLINK Development Kit is the REDLINK Bridge, a wireless module that allows apps to communicate with the DSMC through the REDLINK Command Protocol (RCP). Additionally, the REDLINK Bridge interfaces with the RED 3-Axis Lens Control System’s T.H.C. (Tactical Hand Controller) to control focus and iris on Canon and Nikon lenses. The REDLINK Bridge attaches to the rear of the DSMC BRAIN or compatible rear module, and supports a wireless communication range of approximately 50 ft.
Note: The REDLINK Bridge requires that the DSMC is on firmware v5.2.8 or later.
- MODULE ADAPTOR
- +1 Adaptor Module
- PRO BATTERY MODULE (DUAL)
- PRO BATTERY MODULE (QUAD)
- PRO I/O MODULE
|Wireless Range2||Approximately 50 feet|
|Data Rates||1 Mbps to 72 Mbps|
|Network Modes3||Ad-Hoc mode |
|Network Channels||Channel 1 to Channel 11 (when connecting to a device) |
Channel 1 to Channel 42 (when connecting to T.H.C.)
|Output Connector||1x 0B 6-pin LEMO auxiliary connector|
|Dimensions||Height (w/ antenna): 5.17" (13.1 cm) |
Height (w/o antenna): 4.32" (11 cm)
Width: 2.95" (7.5 cm)
Depth: 1.06" (2.7 cm)
|Weight||0.477 lbs (216 g)|
|Coating||Black anodized coating|
|Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||–20°C to 50°C (–4°F to 122°F)|
|Operating Humidity Range||0% to 85%, non-condensing|
|Storage Humidity Range||0% to 85%, non-condensing|
|Typical Operating Power Dissipation||220 mA|
|Peak Operating Power Dissipation||300 mA|
1The REDLINK Bridge is not a wireless access point.
2As with all wireless devices, the communication range may be affected by the environment and any radio frequency (RF) interference that may be present.
3Ad-Hoc and infrastructure modes cannot be used at the same time.
|Dimensions||Height: 7.00" (17.78 cm) |
Width: 6.50" (16.51 cm)
Depth: 2.50" (6.35 cm)
|Weight||0.75 lbs (340 g)|