TILTA
Nucleus-M Wireless Follow Focus System
Tilta Nucleus-M langaton Follow Focus
Nucleus-M on vallankumouksellinen langaton follow focus. Tiltan tuote on hinta-laatusuhteeltaan todella hyvä! Nucleus-M "follarin" tarkennus, iiris ja zoomaus käy "käden käänteessä". Yhteensopivuus kaikkien Cine-objektiivien ja DSLR-objektiivien (vastahammasrattaiden avulla) kanssa.
Nucleus-M on täydellinen kumppani kaikkien 3-akselisten kameravakaimien, olkatukijärjestelmien ja kuvauskoptereiden kanssa.
Huom! Akut eivät sisälly hintaan (saatavana erikseen).
Specs:
- 1. The Nucleus-M is a wireless 3 Channel system.
- 2. Connections between the FIZ hand unit and the two hand grips to the motors are completely wireless.
- 3. Each motor has a built-in MDR unit, saving space and setup time.
- 4. A single motor can be powered directly from the camera’s battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors.
- 5. There is no limit on the amount of motors an operator can attach per channel.
- 6. The FIZ hand unit and two handle grips have a wireless range of 1000 feet.
- 7. The signal from the FIZ hand unit can be upgraded to 1 1/4 miles with an additional accessory.
- 8. Both hand grips and FIZ hand unit run off (2) 18650 batteries. (Batteries are NOT included.)
- 9. When fully charged the batteries in the hand grips can last up to 2 days.
- 10. The batteries in the FIZ unit can last up to 10 hours.
- 11. FIZ hand unit is capable of controlling 3 channels – focus, zoom, and iris as well as overriding the hand grips.
- 12. 0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm
- 13. Motors can calibrate on lenses without hard stops – such as photo-lens with follow focus gears.
- 14. Motors fit standard 15mm and 19mm Rods
- 15. Ideal for Gimbal, Drone, and Shoulder-mounted setups
Includes:
- (1) Wireless FIZ Hand Unit
- (2) Brushless Wireless Motors with 19mm Rod Support and 15mm Rod Bushings
- (1) Wireless Handle Left (Focus)
- (1) Wireless Handle Right (Iris, Zoom)
- (4) Follow Focus marking disks
- (1) 7-Pin to 740mm P-TAP Motor Power Cable
- (1) 31cm 7-Pin to 7-Pin Straight Motor Connection Cable
- (1) 18cm 7-Pin to 7-Pin Straight Motor Connection Cable
- (2) Photographic Lens Follow Focus Adapter
- (1) 18650 4 Slot Battery Charger
- (2) Handle to Arri Standard Rosette Adapter
- (2) Handle to Gimbal Bar Adapter (Compatible with 25mm/30mm Diameter)
- (1) Wireless FIZ Hand Unit Strap
- (1) Hard Shell Waterproof Safety Case
_t.jpg)
